.". Workplace Safety And Health ,WSH Safety Resources Blog: NEA

Featured Post

MOM Revised Heat Stress Framework

REVISED FRAMEWORK TO GUIDE EMPLOYERS AND PROTECT OUTDOOR WORKERS AGAINST HEAT STRESS With global warming, rising temperatures in Singapore w...

Showing posts with label NEA. Show all posts
Showing posts with label NEA. Show all posts

Sunday, September 8, 2024

Hazards of Overfilling Skid Bin

 Advisory to Waste Generators and General Waste Collectors (GWCs)


SINGAPORE : Joint circular from WSH Council , LTA and NEA seek the cooperation of waste generators and other users of OTCs such as companies and Town Councils to help ensure that the OTCs are not overfilled at their premises.

Exceeding the Maximum Laden Weight of vehicles attracts a fine

Overfilled OTCs that exceed the maximum laden weight (MLW)1 is a hazard to both drivers and other road users. It is an offence under the Road Traffic Act for vehicles that exceed the MLW to be used on the road; and vehicles found in violation of load limits may face fines of up to $1,000 and/or imprisonment for up to 3 months for first-time offenders, and doubled for repeat offenders.

Overfilled OTCs Should Not Be Hauled for Safety Reasons

Under the licensing conditions, the GWCs are required to ensure that the OTCs are not overly filled with waste and that waste must be securely covered during transportation. Failure to do so could pose safety hazards to other road users, e.g. waste could drop off on the road. Similarly, this would compromise the safety of the drivers and staff of the disposal facilities. 

Hence, OTCs should only be filled up to their brim, which also makes it easier for the OTCs to be securely covered for transportation.

GWCs have the rights to reject collection of overfilled OTCs if waste generators do not cooperate and ensure no overfilling of OTCs. Errant GWCs found hauling overfilled OTCs may

be subject to enforcement action.


Negative examples of overfilling the open top containers


Positive examples of filling up an open top container




Saturday, August 3, 2024

Joint Circular on Nail Salon Safety

 Protecting Employees’ and Customers’ Health from Chemicals in Nail Salons


This circular provides guidance to nail salons on measures that can protect employees’ and customers’ health by minimising exposure to harmful chemicals.


Nail care products such as nail polishes, fingernail glues, and nail polish removers contain chemicals, some of which can be harmful to the health of nail salon employees and customers1. These products are regulated as cosmetic products under the Health Products

Act and must meet safety requirements specified in Act, as well as the Health Products (Cosmetic Products – ASEAN Cosmetic Directive) Regulations. To assist nail salons with

compliance, the safety requirements are set out in this Circular.


Use products that comply with safety requirements


a. Check that nail care products have been notified with the Health Sciences Authority (HSA), by checking HSA’s infosearch. Ensure that nail care products used do not contain prohibited chemicals and that restricted chemicals are used within the specified conditions

of use by referring to the Third Schedule of the cosmetic products regulation. For example:

▪ Formaldehyde is not allowed to be added as an ingredient into all cosmetic products, including nail care products.

▪ Toluene is only permitted in nail care products up to a maximum

concentration of 25%.

o A cosmetic product containing prohibited chemicals or using restricted chemicals not within the specified conditions of use would be considered an unwholesome health product. A person who manufactures, imports, or supplies an unwholesome

A person who manufactures, imports, or supplies an unwholesome health product is liable to a fine of up to $50,000 and/or imprisonment up to 2 years.


If the product cannot be found on HSA’s infosearch, inform your nail care product supplier to submit a notification via HSA’s website. A person who supplies an un-notified cosmetic product is liable to a fine of up to $20,000 and/or imprisonment up to 12 months.


b. Ensure that nail care products used comply with labelling requirements, including listing all ingredients on the product labels.

o Inform your nail care product supplier to add a warning label of “Contains formaldehyde”, if their products contain permitted preservatives that can release formaldehyde2 exceeding 0.05%.

o A person who supplies a cosmetic product that does not comply with this labelling requirement is liable to a fine of up to $50,000 and/or imprisonment up to 2 years.


Choose safer products

c. Minimise chemical exposures by using products that are water-based or have a low content of volatile organic compounds (VOCs, such as formaldehyde, toluene, xylene).


Follow safe work practices

d. Communicate to employees the hazards of handling nail care products, and encourage them to adopt safe work practices such as:

o Good housekeeping, e.g. keep dispenser bottles closed when not in use, clean up spills immediately.

o When applying nail care products, use only the amount needed to minimise chemical emissions into the air.

o Dispose of waste containing nail care products in sealed bags or keep wastebins covered. Empty wastebins frequently.

o Where needed, use personal protective equipment (PPE) such as gloves and goggles to protect employees’ skin and eyes. Nail salon operators should refer to the information in product labels or information sheets and provide the appropriate PPEs where necessary.


Ensure good ventilation and indoor air quality


e. Ventilate the space within the nail salon. If the salon has an air-conditioning and mechanical ventilation system that provides

outdoor air, check that the system is in good working condition.

o In air-conditioned spaces with no outdoor air supply, consider opening doors and windows to facilitate air exchange when feasible. Additionally, consider using local exhaust systems such as portable ventilation machines or ventilated tables to minimise exposure to VOCs emitted.


f. To maintain good indoor air quality for the wellbeing of customers and employees, operators may also refer to the advisory limits of specific VOCs in the Singapore Standard SS554: Code Of Practice For Indoor Air Quality For Air-Conditioned Buildings.




Useful resources

1. Stay Healthy and Safe While Giving Manicures and Pedicures – a Guide for Nail Salon Workers, U.S. Department of Labor, Occupational Safety and Health Administration, 2012, https://www.osha.gov/Publications/3542nail-salon-workers-guide.pdf

2. Controlling Chemical Hazards During the Application of Artificial Fingernails, U.S. Department of Health and Human Services, National Institute for Occupational Safety and Health, 1999, https://www.cdc.gov/niosh/docs/99-112/default.html

3. Information Sheet: Taking care of your chemical health and safety in nail bars and salons, Health and Safety Authority, Ireland.

https://www.hsa.ie/eng/Publications_and_Forms/Publications/Chemical_and_ Hazardous_Substances/Nail_Bars_Info_Sheet.pdf


Note 1 Exposure to chemicals in nail care products may occur via three routes: (1) inhaling volatile organic compounds

(VOCs such as formaldehyde, toluene, xylene) emitted from the products; (2) getting the products on skin or in eyes; or (3) ingesting the products that have come in contact with food or drinks. For example, exposure to formaldehyde can be through inhalation and this may lead to respiratory irritations, allergic reactions, and even

long-term serious health effects such as cancer


SCDF upcoming events

(adsbygoogle = window.adsbygoogle || []).push({});

Upcoming Events

HardwareZone Singapore

Jobs Portal