Safety Checklist For Power Tools & Equipment

SAFETY CHECKLIST FOR POWER TOOLS
Safety Questionnaire			Yes	No
	Are all tools and equipment (both company and employee owned) used by employees at their workplace in good condition?
	Are hand tools such as chisels and punches, which develop mushroomed heads during use, reconditioned or replaced as necessary?
	Are broken or fractured handles on hammers, axes and similar equipment replaced promptly?
	Are worn or bent wrenches replaced regularly?
	Are appropriate handles used on files and similar tools?
	Are employees made aware of the hazards caused by faulty or improperly used hand tools?
2.3	Are appropriate safety glasses, face shields, etc. used while using hand tools or equipment which might produce flying materials or be subject to breakage?
2.4	Are jacks checked periodically to ensure they are in good operating condition?
2.5	Are tool handles wedged tightly in the head of all tools?
2.6	Are tool cutting edges kept sharp so the tool will move smoothly without binding or skipping?
	Are tools stored in dry, secure locations where they won’t be tampered with?
	Is eye and face protection used when driving hardened or tempered spuds or nails?
SAFETY CHECKLIST FOR PORTABLE POWERED OPERATOR TOOLS AND EQUIPMENT
Safety Questionnaire			Yes	No
	Are grinders, saws and similar equipment provided with appropriate safety guards?
	Are power tools used with the correct shield, guard, or attachment, recommended by the manufacturer?
	Are portable circular saws equipped with guards above and below the base shoe? Are circular saw guards checked to assure they are not wedged up, thus leaving the lower portion of the blade unguarded?
	Are rotating or moving parts of equipment guarded to prevent physical contact?
	Are all cord-connected, electrically operated tools and equipment effectively grounded or of the approved double insulated type?
	Are effective guards in place over belts, pulleys, chains, sprockets, on equipment such as concrete mixers, and air compressors?
	Are portable fans provided with full guards or screens having openings ½ inch or less?
	Is hoisting equipment available and used for lifting heavy objects, and are hoist ratings and characteristics appropriate for the task?
	Are ground-fault circuit interrupters provided on all temporary electrical 15 and 20 ampere circuits, used during periods of construction?
	Are pneumatic and hydraulic hoses on power operated tools checked regularly for deterioration or damage?
	Is all machinery or equipment capable of movement, required to be de-energized or disengaged and locked-out during cleaning, servicing, adjusting or setting up operations, whenever required?
	Where the power disconnecting means for equipment does not also disconnect the electrical control circuit: Are the appropriate electrical enclosures identified?
	Where the power disconnecting means for equipment does not also disconnect the electrical control circuit: Is means provided to assure the control circuit can also be disconnected and locked-out?
	Is the locking-out of control circuits in lieu of locking-out main power disconnects prohibited?
	Are all equipment control valve handles provided with a means for locking-out?
	Does the lock-out procedure require that stored energy (mechanical, hydraulic, air, etc.) be released or blocked before equipment is locked-out for repairs?
	Are appropriate employees provided with individually keyed personal safety locks?
	Are employees required to keep personal control of their key(s) while they have safety locks in use?
	Is it required that only the employee exposed to the hazard, place or remove the safety lock?
	Is it required that employees check the safety of the lock-out by attempting a startup after making sure no one is exposed?
	Are employees instructed to always push the control circuit stop button immediately after checking the safety of the lock-out?
	Is there a means provided to identify any or all employees who are working on locked-out equipment by their locks or accompanying tags?
	Are a sufficient number of accident preventive signs or tags and safety padlocks provided for any reasonably foreseeable repair emergency?
	When machine operations, configuration or size requires the operator to leave his or her control station to install tools or perform other operations, and that part of the machine could move if accidentally activated, is such element required to be separately locked or blocked out?
	In the event that equipment or lines cannot be shut down, locked-out and tagged, is a safe job procedure established and rigidly followed?

SAFETY CHECKLIST FOR PORTABLE POWERED ACTUATED TOOLS
Safety Questionnaire
	Are employees who operate powder-actuated tools trained in their use and carry a valid operator’s card?
	Is each powder-actuated tool stored in its own locked container when not being used?
	Is a sign at least 7 inches by 10 inches with bold face type reading "POWDERACTUATED TOOL IN USE" conspicuously posted when the tool is being used?
	Are powder-actuated tools left unloaded until they are actually ready to be used?
	Are powder-actuated tools inspected for obstructions or defects each day before use?
	Do powder-actuated tool operators have and use appropriate personal protective equipment such as hard hats, safety goggles, safety shoes and ear protectors?

Safety Checklist For Flammable And Combustibles

Safety Checklist For Flammables And Combustibles

 

SAFETY CHECKLIST FOR FLAMMABLE AND COMBUSTIBLE MATERIALS
Safety Questionnaire			Yes	No
	Are combustible scrap, debris, and waste materials (oily rags, etc.) stored in covered metal receptacles and removed from the worksite promptly?
	Is proper storage practiced to minimize the risk of fire including spontaneous combustion?
	Are approved containers and tanks used for the storage and handling of flammable and combustible liquids? Are all connections on drums and combustible
	Are all connections on drums and combustible liquid piping, vapor and liquid tight
	Are all flammable liquids kept in closed containers when not in use (for example, parts cleaning tanks, pans, etc.)?
	Do storage rooms for flammable and combustible liquids have explosion-proof lights?
2.3	Do storage rooms for flammable and combustible liquids have mechanical or gravity ventilation?
2.4	Is liquefied petroleum gas stored, handled, and used in accordance with safe practices and standards?
2.5	Are "NO SMOKING" signs posted on liquefied petroleum gas tanks?
2.6	Are liquefied petroleum storage tanks guarded to prevent damage from vehicles?
	Are all solvent wastes and flammable liquids kept in fire-resistant, covered containers until they are removed from the worksite?
	Is vacuuming used whenever possible rather than blowing or sweeping combustible dust? Are firm separators placed between containers of combustibles or flammables, when stacked one upon another, to assure their support and stability?
	Are fuel gas cylinders and oxygen cylinders separated by distance, and fireresistant barriers, while in storage?
	Are fire extinguishers selected and provided for the types of materials in areas where they are to be used?
	Are appropriate fire extinguishers mounted within 75 feet of outside areas containing flammable liquids, and within 10 feet of any inside storage area for such materials?
	Are extinguishers free from obstructions or blockage?
	Are all extinguishers serviced, maintained and tagged at intervals not to exceed 1 year?
	Are all extinguishers fully charged and in their designated places?
	Where sprinkler systems are permanently installed, are the nozzle heads so directed or arranged that water will not be sprayed into operating electrical switch boards and equipment
	Are "NO SMOKING" signs posted where appropriate in areas where flammable or combustible materials are used or stored?
	Are all spills of flammable or combustible liquids cleaned up promptly?
	Are storage tanks adequately vented to prevent the development of excessive vacuum or pressure as a result of filling, emptying, or atmosphere temperature changes?
	Are storage tanks equipped with emergency venting that will relieve excessive internal pressure caused by fire exposure?
	Are "NO SMOKING" rules enforced in areas involving storage and use of hazardous materials?