.". Workplace Safety And Health ,WSH Safety Resources Blog

Featured Post

Workplace Safety and Health Advisory

  WSH Advisory for Fatal Accidents in Second Half of 2023 The Ministry of Manpower has released the WSH statistics for 2023. Singapore’s wor...

Thursday, December 22, 2011

Acceptable WSH Condition And Behavior


Appendix A        Acceptable WSH Condition & Behaviour

WSH Regulations
Section
Requirements
Frequency Of Inspection / Test
Acceptable WSH behaviour
Acceptable WSH Condition
WSH Act

All Sections
As Occupier
N.A
X

WSH Act
Responsibilities of workers
As Worker
N.A
X

WSH (Construction)Reg 2007 Para 33(2)
Duties of employee to wear PPE
As workers
Duties of employee to wear PPE
X

WSH ( Construction) Regulations 2007 & Factories ( Safety Training Course) Order 2001
Construction workers to attend construction safety orientation course
As construction worker
Construction workers to attend construction safety orientation course
X

WSH ( Construction) Regulations 2007 & Factories ( Safety Training Course) Order 2001
Worker working in confined space to attend Safety Orientation Course ( Manhole)
-Rescue team
Worker working in confined space
Worker working in confined space to attend Safety Orientation Course ( Manhole)
-Rescue team
X

WSH ( Construction) Regulations 2007 & Factories ( Safety Training Course) Order 2001
Lifting Supervisor to attend lifting supervisor safety course
Lifting supervisor
Lifting Supervisor to attend lifting supervisor safety course
X

WSH ( Construction) Regulations 2007 & Factories ( Safety Training Course) Order 2001
Forklift operator to attend forklift driver’s training course
Forklift Operator
Forklift operator to attend forklift driver’s training course
X

WSH ( Construction) Regulations 2007 & Factories ( Safety Training Course) Order 2001
Project managers to attend construction safety course for project managers
Project Manager
Project managers to attend construction safety course for project managers
X

WSH ( General Provisions) Regulations
43
Buyer/End User
Safety data sheets for chemicals stored on worksite
x
X
WSH ( Incident Reporting ) Regulations
Fac
Occupier/Employer to report dangerous occurrences, accidents leading to injury or death and occupational injuries
Submit Incident report within 10 days
X
X
WSH ( Registration of Factories) Regulations
Factory Permit
Occupier
Registration of worksite as factory
x

X
WSH (First Aid) Regulations
All Sections
Provision sufficient first aid box & appoint sufficient Occupational first aider
Every 100 workers : 1 Occupational one lst aider
x
X
WSH (Workplace Safety and Health Committee ) Regulations

Workplace Safety & Health Committee
Occupier to ensure  WSH committee form & members to meet once a month
Occupier to ensure  WSH committee form & members to meet once a month
X
X
WSH (Risk Management) Regulations
Risk Assessment
Risk assessment for all work site activities
Risk assessment for all work site activities
X
X
WSH ( Abrasive Blasting) Regulations
Abrasive Blasting
Maintenance and use of abrasive blasting machine & precautions to take
-supplied-air blasting helmet
-blasting cabinet shall be ventilated with air of a velocity of not less than 150 linear
metres per minute through all operating openings
-inspected and examined
by a competent person at least once in every 7 days.
Once in every 7 days inspected & examined by competent person

blasting cabinet shall be ventilated with air of a velocity of not less than 150 linear
metres per minute
X
X
WSH (WSHO) Regulations
All Sections
Appointment of safety officer
Factories -100 workers or more except garment factory

Construction with contract sum of more than $10 Million

Factories processing petroleum and petroleum products
X
X
WSH ( Medical Examination) Regulations
All Sections
Person working in hazardous environment need to go for regular medical check up
Person to be employed to work in hazardous environment shall be medically examined by a
Designated  workplace doctor and certified fit to work in such occupation within 30 days before the date he is to commence his employment in such occupation.

Registers of employees working in hazardous occupations shall be kept for a period of 5 years
X
X
WSH (Operations of crane) Regulations
All Sections
Lifting Plan required
Crane Operation shall have a Lifting Plan
Rigger man – rigger man training course
Signal man –signal man training course
Suspended load –suspended load training course
Lifting supervisor –lifting supervisor course
X
X
WSH ( Scaffolds) Regulations
All Sections
Occupier to ensure every scaffold shall have
a)one designated access point
b)Warning signs displayed
c)maximum loading on timber scaffold 75 kgf per square metre
d) others 220kgf per square meter

Every scaffold shall have at least one designated access point from which a person may gain access onto the scaffold

Warning signs are displayed at all times until the scaffold is dismantled
a scaffold in a workplace shall not be overloaded and, so far as is reasonably practicable, the load thereon shall be evenly distributed.
(5) any material transferred to or from a scaffold in a workplace, the material shall be moved or deposited without imposing any violent shock.
(6) The maximum loading for persons and materials allowed on any work platform in any bay of a scaffold in a workplace shall be —
(a) in the case of a timber scaffold, 75 kgf per square metre; or
(b) in any other case, 220 kgf per square metre.
(7) The maximum number of persons allowed on any work platform in any bay of a timber or metal scaffold in a workplace shall be —
(a) in the case of a timber scaffold, not more than 2 persons; and
(b) in the case of a metal scaffold, not more than 4 persons.
(8) The maximum number of persons allowed in any bay of a timber or metal scaffold in a workplace shall be —
(a) in the case of a timber scaffold, not more than 4 persons; and
(b) in the case of a metal scaffold, not more than 8 persons.
X
X
WSH (Noise) Regulations
All Sections
Appointment of competent person for noise monitoring
Where there are 50 or more relevant persons employed or working in a workplace, it shall be the duty of the occupier of the workplace to appoint a competent person to advise on all proper noise control measures
X
X
WSH (General Provisions) Sanitary Conveniences
Section 8ab
Provision and maintenance of clean toilet with adequate lighting
Occupier to provide and maintain clean toilet & adequate lighting
X
X
WSH (General Provisions) Electric generators, motors, machinery
Section 121ab, 12(2) & 12(3)
Electric generators, motors & machinery to be fenced
Occupier to ensure all electric generators, motors & machinery to be fenced
X
X
WSH (General Provisions) Removal of fencing from machinery
Whole of section 13
Removal of fencing from machinery

X
X
WSH (General Provisions) Electrical Installation & Equipment
Whole of section 14
Electrical installation & equipment are of good construction, free of defects & maintained & practical measures undertaken to prevent electric shock
Occupier to ensure all electrical installation & equipment are of good construction, free of defects & maintained & practical measures undertaken to prevent electric shock
X
X
WSH (General Provisions) Lock out procedure
Whole of section 16
inspection, cleaning, repair or maintenance of any plant, machinery, equipment or electrical installation in the workplace
Occupier to establish and implement lock out tag out procedure for inspection, cleaning, repair or maintenance of any plant, machinery, equipment or electrical installation in the workplace
X
X
WSH (General Provisions) Hoist & Lifts
Whole of Section 19
Hoist & lift to be tested by authorised examiner and certificate maintain in record
Hoist once every 6 months to be inspected & tested by authorised examiner
X
X
WSH (General Provisions) Lifting Gears
Whole of Section 20
Lifting gear to be tested by authorised examiner and certificate maintain in record
Once every 12 months to be inspected & tested by authorised examiner
X
X
WSH (General Provisions) Lifting appliances and lifting machines
Whole of Section 21
Lifting appliances and lifting machines to be tested by authorised examiner and certificate maintain in record
Lifting ApplianceOnce every 12 months

Lifting Machine-Once every 6 months

Chains used in the connection of molten metals and molten slags
Once every 6 months
X
X
WSH (General Provisions) Register of lifting gears, lifting appliances and lifting machines
Whole of Section 22
Register of lifting gears, lifting appliances and lifting machines to be maintain

X
X
WSH ( General Provisions) Conditions before steam boiler, steam receiver, air receiver or refrigerating plant pressure
receiver may be used
Whole of Section 27
Steam boiler ,receiver, air receiver, refrigerating plant pressure receivers to be tested and examined by authorised examiner

X
X
WSH ( General Provisions) Steam Boilers
Whole of Section 28
Steam Boiler to be fix with safety valve, maintained, tested & examined by authorised examiner
Once every 2 years by authorised examiner

Surface of external shell of steam boiler once every 6 years
X
X
WSH ( General Provisions) Steam Receivers
Whole of Section 29
Steam Receiver to be fix with safety valve, maintained, tested & examined by authorised examiner

X
X
WSH ( General Provisions) Steam Containers
Whole of Section 30
Steam containers maintained, outlet open and free obstruction

X
X
WSH ( General Provisions) Air receiver
Whole of Section 31
Air receiver to be tested once every 2 years by authorised examiner

X
X
WSH (General Provisions) Periodical examinations when authorised examiner is not available
Whole of Section 32
To notify Commissioner to arrange for an authorised examiner

X
X
WSH (General Provisions) Pipes and equipment conveying certain substances
Whole of Section 34
Pipes & equipment convey steam, air, refrigerant or any hazardous substance free of defects & properly maintained


X
X
WSH (General Provisions) Prevention of fire
Whole of Section 37
Occupier to keep ignition source away from flammable materials

X
X
WSH (General Provisions) Safety provisions in case of fire
Whole of Section 38
Occupier to provide safe means of escape, doors swing outwards & Exit signs.

X
X
WSH ( General Provisions) Toxic dust, fumes or other contaminants
Whole of Section 39
Occupier to provide local ventilation to prevent accumulation of toxic dust, fumes or other contaminants & conduct industrial hygiene monitoring test

X
X
WSH (General Provision) Permissible exposure levels of toxic substances

Whole of Section 40
Occupier to ensure no person excessively exposed to toxic substances

X
X
WSH (General Provision) Hazardous substances

Whole of Section 41
Occupier to display warning signs of hazardous substance and to dispose hazardous waste accordingly

X
X
WSH (General Provision) Safety Datasheet

Whole of Section 43
Hazardous substance shall have safety datasheet

X
X
WSH (General Provision) Permissible exposure levels of toxic substances
40.- Welding fumes
Welding fumes
Welding Fumes PELTS-5 mg/m3

X
X
WSH (General Provision) Permissible exposure levels of toxic substances
40.- Metal dust
Metal Dust
Metal Dust PELTS -10mg/m3

X
X
WSH (General Provision) Permissible exposure levels of toxic substances
40.- Respirable dust
Respirable
Respirable Dust PELTS-
0.1mg/m3

X
X
WSH (General Provision) Permissible exposure levels of toxic substances
40.- triethylamine
Triethylamne
Triethylamine PELTS-
4mg/m3

X
X
Environmental Public Health (Toxic Industrial Waste)
Regulations

Toxic Industrial Waste Disposal
Toxic Industrial waste disposal by licensed waste contractor

X
X
Environmental Public Health (Cooling Towers and Water
Fountains) Regulations
Legionella Bacteria
Control of Legionella bacteria in cooling tower

X
X
Environmental Public Health (General Waste Collection)
Regulations
General Waste Collection
General waste collection & disposal by licensed waste disposal contractor

X
X
Environmental Pollution Control (Air Impurities)
Regulations

Use current premise as a scheduled premises
Permit to use as scheduled premises

X
X
Environmental Pollution Control (Ozone Depleting Substances)
Regulations

Ozone depleting substance 
Ozone depleting substance prohibited to be use as air con refrigerant

X
X
Environmental Pollution Control (Hazardous Substances)
Regulations

Import, use and store hazardous substances
Hazardous Substance license to import, use and store hazardous substances

X
X
Environmental Pollution Control (Trade Effluent)
Regulations
Discharge trade effluent into water course
License to discharge trade effluent into water course

X
X
Environmental Pollution Control (Boundary Noise Limits for
Factory Premises) Regulations

Boundary Noise Limits
Boundary noise Limits for factory premise

X
X
Smoking (Prohibition in Certain Places)
Act, Cap. 310
Smoking in prohibited places
No smoking in air conditioned environment and within 5 meters to any office building entrance

X
X
Work Injury Compensation Act 2008
Make provision for compensation of employees due to injury and illnesses arising from work.
Workmen workplace injury claim

X
X
Fire Safety Act
(Chapter 109A)
All Fire Safety Manager Regulations
Appointment of fire safety manager
Certain non residential building to appoint FSM

X
X
Fire Safety Act
(Chapter 109A)
Fire Safety (Designation of Premises requiring Fire Emergency
Plan) Notification 1994

Fire Emergency Plan
Fire Emergency Plan, fire drills & table top exercise requirements

X
X
Fire Safety Act
(Chapter 109A) Fire Safety (Buildings Requiring Fire Certificate) Order 2004


Fire Certificate
Fire Certificate Application

X
X
Fire Safety Act - Fire Safety (Petroleum and Flammable Materials)
(Amendment) Regulations 2006

Petroleum & Flammable Materials Storage License
Petroleum & Flammable Materials Storage License Application

X
X













Identify Acceptable WSH conditions and behaviours at the workplace

Identify Acceptable WSH conditions and behaviours at the workplace

                                   

To establish what are the acceptable WSH conditions and behaviours of the organization, the  organization need to identify from their organization legal  register which maintain the WSH legal and other requirements as well as the organizational procedures ,  relevant Code of Practice and the Singapore Standards on what are the applicable WSH legal and Other requirements  applicable to Reda Production System(s) manufacturing activities, products and services

Using the relevant information from the WSH legal requirements, the  WSH coordinator  can easily tabulate out the organization minimum workplace safety and health standards  on WSH conditions, monitoring and inspection frequency That the organization must meet because the WSH legal requirements are legal binding where the organization  have to comply to deter incurring liabilities for WSH  legal non-compliance

Flowchart on steps that have to be taken in order to effectively participate in WSH inspection



The WSH Coordinator can also obtain relevant information from the organization WSH legal register to help him to

•    Establish the frequency of monitoring and the areas to be inspected.
      Refer to Appendix C – Monthly Site Safety Inspection

      
•    Establish the criteria for critical WSH parameters for equipment and processes at the Workplaces.
      Refer to Appendix B –Statutory Inspection Monitoring Chart


      
•    Establish the WSH performance expectation at the workplaces
      Refer to Appendix A –Acceptable WSH Conditions & Behaviours at the workplace


•    In-house rules and regulations

•    Adhere to criteria for critical WSH parameters developed by subject matter experts and WSH officers

•    Establish the legal specifications on WSH conditions and the monitoring and inspection frequency

Safety And Health Survey Checklist



Safety and Health Program Assessment

Worksheet



I. MANAGEMENT LEADERSHIP

AND EMPLOYEE INVOLVEMENT










A. Clear worksite

safety and health policy




There is a S&H policy and all employees accept,

can explain, and fully understand it.




There is a S&H policy and majority of employees

can explain it.




There is a S&H policy and some employees can explain

it.




There is a written (or oral, where appropriate)

policy.




There is no policy.










B. Clear goals

and objectives are set and communicated




All employees are involved in developing goals

and can explain desired results and how results are measured.




Majority of employees can explain results and measures

for achieving them.




Some employees can explain results and measures

for achieving them.




There are written (or oral, where appropriate)

goals and objectives.




There are no safety and health goals and objectives.












C-1. Management

Leadership




All employees can give examples of management's

commitment to safety and health.




Majority of employees can give examples of management's

active commitment to safety and health.




Some employees can give examples of management's

commitment to safety and health.




There is some evidence that top management is committed

to safety and health.




Safety and health is not a top management value

or concern.












C-2. Management

example




All employees recognize that management always follows

the rules and addresses the safety behavior of others




Management follows the rules and usually addresses

the safety behavior of others.




Management follows the rules and occasionally addresses

the safety behavior of others.




Management generally follows basic safety and health

rules.




Management does not follow basic safety and health

rules.












D. Employee involvement



All employees have ownership of safety and health

and can explain their roles.




Majority of employees feel they have a positive

impact on identifying and resolving safety and health issues.




Some employees feel that they have a positive impact

on safety and health.




Employees generally feel that their safety and health

input will be considered by supervisors.




Employee involvement in safety and health issues

is not encouraged nor rewarded.












E. Assigned safety

and health responsibilities




All employees can explain what performance is expected

of them.




Majority of employees can explain what

performance is expected of them.




Some employees can explain what performance is expected

of them.




Performance expectations are generally spelled out

for all employees.




Specific job responsibilities and performance expectations

are generally unknown or hard to find.












F. Authority and

resources for safety and health




All employees believe they have the necessary authority

and resources to meet their responsibilities.




Majority of employees believe they have the necessary

authority and resources to meet their responsibilities.




Authority and resources are spelled out for all,

but there is often a reluctance to use them.




Authority and resources exist, but most are controlled

by supervisors.




All authority and resources come from supervision

and are not delegated.












G. Accountability



Personnel are held accountable and all performance

is addressed with appropriate consequences.




Accountability systems are in place, but consequences

used tend to be for negative performance only.




Personnel are generally held accountable, but consequences

and rewards do not always follow performance.




There is some accountability, but it is generally

hit or miss.




There is no effort towards accountability.












H. Program Review

(Quality Assurance)




In addition to a comprehensive review, a process

is used which drives continuous correction.




A comprehensive review is conducted at least annually

and drives appropriate program modifications.




A program review is conducted, bit it doesn't drive

all necessary program changes.




Changes in programs are driven by events such as

accidents or near misses.




There is no program review process.









Continue Save values and return to the main worksheet

page.
Cancel Return to the main worksheet page without saving
these values.

Reset

Clear all
form values on this page.
Safety

Site Coordinator

SAFETY COORDINATOR /ASST ROLES AND RESPONSIBILITIES

( In the absence of Fire Safety Manager )

i. Upon lst alarm activation, he/she shall proceed to the Fire Command Centre ( FCC) to oversee the operations

ii Notified the Fire Management Company, Ademcco on fire alarm activation and also inform them that
   investigation is ongoing to establish whether the fire situation is confirmed.

iii Isolate the alarm bell but not to reset

iv Identify the fire alarm location by referring to the main fire control panel

v Contact the affected floor Fire Warden & instruct him ( FW) to proceed to the affected floor to physically check on the sub fire panel to establish the exact location of the fire alarm activation and to proceed to the  affected location to investigation and to report to fire command center whether the fire situation is confirmed

vi Responsible for coordinating the smooth sequential floor evacuation with the respective floor Fire Warden

vi Responsible for updating the Building evacuation Status chart at the Fire Command Center

vii Responsible for furnishing SCDF with the following information
a) Location of the fire floor
b) Nature of business operation on the fire floor
c) Extent of the fire breakout and the fire damaged
d) Location of all fire fighting equipment
e) Building evacuation status
f) No. of missing person(s)
g) Hazardous substance inventory level

Roles & Responsibilities Of Security

Roles & Responsibilities Of  Security Officer During A Fire Situation



i    Upon the plant building fire alarm activation, the Chief Security Officer shall instruct his security guards at
     all guard posts to lower the Exits gantry post and to stop all contractors and visitors from entering &
     leaving the plant/building

i    Contractor who is seen trying to leave the plant when the fire alarm is activated will be advised to report to
     the main security guard post for emergency headcount check and thereafter to report to the Assembly
    Area

ii   Visitors/Contractors trying to enter the plant when the plant fire alarm  is activated will be stopped from
     entering and security officer shall advise these parties to contact the company host for rescheduling of
     their appointment amid of the unplanned fire emergency situation

iv   He shall instruct all his security officers at various guard posts to report to the main guard house for
      emergency situation deployment after they have cleared their individuals guard post

v     Deploy his security  officer for the following duties:
 
      a) deploy his security officer to perform crowds control and redirecting  the building occupants to  the
          Assembly Area
      b) deploy his security officer for bicycle patrol at and within the building premises to look out for lost
          building occupants who do not know the where about of the Assembly Area and to look out for
          unauthorized personnel who may seize the opportunity to trespass the building to commit crime
      c)  deploy his security officer to direct SCDF Fire engine to the Fire Command Center
      d) deploy his security officer to control traffic both within the building premise and building external
      e) contact his security company for additional security officers for deployment at site when necessary
      f)  advise his security officer not to speak to any members of the Press or reporters on the fire situation
        

Roles & Responsibilities Of First Aid Team


First Aid Team Roles & Responsibilities During A Fire Situation




 i   Upon hearing the plant building fire alarm activation, the first Aider Team
     shall proceed to the Fire Command Centre without being  instructed by
     the Fire Command Center

ii    At the FCC the first aid Team shall update their attendance on the
     emergency head count list for Company Emergency Response Team
     kept at the Fire Command Center.

iii   First aid team deployment
     First aid team is break down into 2 teams namely
     -Rescue team
    -CPR team
                    
     Rescue team A : 4 members
     Standby Rescue team B :4 members
     CPR team C :4 member
     Standby CPR team D   :4 members  
      
iv  Rescue first aid team A & B shall immediately don the fire retardant
    coverall, prepare the medical stretcher and disposable face mask and
    carry with them one Walkie Talkie for 2 way communication with the Fire
    Command Center

v While the CPR first aid team shall prepare the first aid kit bag and
   medical stretcher and simultaneously prepare the CPR point in the
   command center for injured person CPR ,bandages and wounds cleaning .

vi Upon fully gowned, the Rescue & CPR first aid team shall assemble at the
    fire command center awaiting for Site Incident Controller instruction

   Scenario 1 : Rescue operation required and there is one injured casualty
                       and injured person was pulled to a safe location by the fire
                       fighters
iii  When rescue operation is required, the Site Incident Controller will
     instruct the Rescue first aid team to proceed to the identified control point
     carrying with them one medical stretcher and walkie talkie and the rescue
     first aid team shall standby at the control point area awaiting for SIC
     instruction before they proceed to the fire scene for rescue operations.

iv   After the injured person was pulled to a safe location away from the fire
     scene, the Site Incident Controller will radioed the Rescue first aid team
     A via walkie talkie to proceed to the injured person pick up point

v   At this juncture the rescue first aid team shall carry with them one medical
    stretcher and proceed to the injured person pickup point from the control
    point location to ferry one injured person back to the Fire Command
    Center for treatment


vi  At the injured person pickup point, the rescue first aid team shall use
    minimum force to bring the injured person onto the medical stretcher
    and radioed back to the fire command center that they are ferrying one
    injured person back to the Fire Command Center

vii  At the fire command center ,the rescue first aid team shall use minimum
     force to carry the injured person to the identified treatment area in FCC.

iii   At this juncture, the CPR first aid team shall take over. CPR first aid
     team shall check and assess the injured person condition to establish
     whether there is a need to call for ambulance services. 

iv   When ambulance services is not required, the CPR first aid team will
      provide the basic first aid treatment such as wounds cleanings ,bandages 
     and CPR at the fire command center prior to the ambulance arrival

      When ambulance service is required

  i   CPR first aid team in charge will contact the main guard post to request for
      ambulance services via walkie talkie.

 ii   Security officer manning the main guard house shall call for ambulance
     service and when the ambulance arrived, the security officer at the main
     guard house shall direct the ambulance service to the fire command
     center

    Scenario 2 : Rescue operation required and there is more than one injured
                        person and the injured persons was pulled to a safe location
                        by the fire fighters

iii   When rescue operation is required, the Site Incident Controller will instruct
      the Rescue first aid team to proceed to the identified control point
      carrying with them one medical stretcher and walkie talkie and the rescue
      first aid team shall standby at the control point area awaiting for SIC
      instruction before they proceed to the fire scene for rescue operations.

iv   Upon activated by the Site Incident Controller, the rescue first aid team
      shall proceed to the control point carrying with them one medical
      stretcher and one walkie talkie and await at the control point for the
      SIC instruction   
    
v    Meanwhile the standby rescue first aid team shall prepare another medical
      stretcher and walkie talkie and standby at the FCC awaiting for SIC
      instruction

 vi  Upon activated by the SIC, the rescue first aid team shall proceed to the
      injured person pick up point with the medical stretcher and walkie talkie
      to ferry one injured person back to the control point. At this stage, the
      standby rescue team shall leave the FCC for the control point carrying
      with them one medical stretcher and one walkie talkie.

vii   When the rescue team returned to the control point with one injured
       person on the medical stretcher, they will hand over the injured person
       to the standby rescue team and simultaneously took over the empty
       medical stretcher to ferry new injured person(s)
 vii  Meanwhile the standby rescue first aid team shall radioed back to the fire
      command center that they are ferrying one injured person back to the
      Fire Command Center and at this stage the CPR first aid team at the
      command center prepare themselves to receive the injured person

w  After ferried the injured person to the FCC, the standby first aid team
     shall proceed again to the control point with one medical stretcher and
     walkie talkie until all injured persons have been evacuated from the fire
     scene and ferried to the FCC

Saturday, December 17, 2011

Roles & Responsibilities Of Site Incident Controller

Roles & Responsibilities Of Site Incident Controller During Fire Situation

                      
   
         i    Gather information of the emergency from security officer who is the
              first personnel at the scene

        ii   
Gather Response Team including the fire fighting team/spill response team
             
and the first aid team

        iii   Plan the fire fighting operations based on the actual fire scene

        iv   Identify control point for the safe gathering of reinforcements, 
              additional fire  extinguisher

        v   lead fire fighting team for all fire fighting activities

       vi   lead the first aider team for all rescue operations activities

      vii   lead the spill response team for all spill containment activities

      viii   Report & update SMC on emergency situation status

     viiii  Meet up SCDF commander after notified by SMC of his arrival
                          

Roles & Responsibilities Of Site Main Controller

Roles & Responsibilities Of Site Main Controller During Fire Situation

            

                i    Determine the nature of the emergency.

                ii  
Report to Emergency Command Centre (Guard House) and collect the
                    
Emergency Evacuation Status Report (See Annex A and B – Emergency
                    
Evacuation Status Report 1 and 2).

                iii  Direct overall activities of the Emergency Response Organization.

                iv 
Liaise with officer from government agencies such as Singapore Civil Defence
                    
Force (SCDF), Singapore Police Force (SPF), National Environment Agency
                    (NEA),

                v   M
ake sure the evacuation alarm is turned on, if necessary.

                vi 
Obtain accurate reporting on the emergency situation

               vii 
Receive report on accounting for personnel from Chief Fire Wardens

            viii   
Decide whether evacuated employees should be re-assigned or go home
                   
when the emergency is over.

           viiii    Receive SCDF Commander when the commander first arrive at site

Roles & Responsibilities Of Telephone Operator


Roles & Responsibilities Of Telephone Operator During A Fire Situation


          I      Upon hearing the plant building fire alarm activated, the telephone
                 operator shall proceed to the Fire Command Centre ( FCC) to take up
                 take up her position to man the Public Address System & message
                 broadcasting.

          ii     At the FCC the telephone operator shall update her attendance on the
                 employee emergency head count checklist located at the Fire Command
                 Center. Immediately she shall made the following announcement twice
                 via the plant building Public Address System

                Text 1 ( When the fire alarm is activated )

              “Ladies and gentlemen, your attention please, The fire alarm in this building
                has been activated. We are investigating the situation. Please remain calm
                and stand-by your speakers for further instruction. Thank you.”

                Text 2 ( False Alarm)

               “Ladies and gentlemen, your attention please, We have investigated the
                situation and found it to be a false alarm. We regret for any inconvenience
                caused. Thank you.”

                Text 3 ( Fire alarm activated and fire situation confirmed)

                “Ladies and gentlemen, your attention, please. There exists an emergency
                 situation in the building. Our Fire Fighting Team is now dealing with the
                 situation. All occupants please remain calm and stand-by your speakers for
                 further instruction.”

               Text 4 ( Fire alarm activated and evacuation is required )

               “Ladies and gentlemen , your attention, please. There exist an emergency
                situation in the building, please evacuate by the nearest exit staircase and
                obey all instructions given by the Fire Warden. Remember to avoid the use
                of lifts.”

Roles & Responsibilities Of Machinery Operators

Roles And Responsibilities Of Machine/Equipment Operators During Fire Situation


Switch off all machinery provided it is safe to do so. Refer to departmental Emergency Response Plan on what are the machinery & equipments which can be switched off in your area

Roles And Responsibilities Of Sprinkler Pump Checker

Roles And Responsibilities Of Sprinkler Pump Checker During A Fire Situation 

When the plant building fire alarm is activated, the sprinkler pump checkers and shall proceed immediately from his location to the guard post - to draw the keys from the Guardhouse and station at the pump room to ensure that the electrical and diesel pumps are running normally. - report back to the mustering point once the pumps are operating normally

Roles & Responsibilities Of Fire Fighters During A Fire Situation

Roles & Responsibilities Of Fire Fighters During A Fire Situation                


             i     Upon hearing the plant building fire alarm activation, the Fire fighting team
                   FFT) shall immediately proceed to the Fire Command Center without being
                   instructed by the Fire Command Center

            ii     At the Fire Command Center, the fire fighting team shall update their
                   attendance on the emergency head count check list for Company
                   Emergency Response Team and shall immediately don the fire retardant
                   coverall, full face respirator and simultaneously check prepare the fire
                   extinguisher & gas detector

            iii    Upon fully gowned, the fire fighting team shall assemble at the fire
                   command center awaiting for SIC further instruction

                   When fire situation is reported during office hours,
                   Fire case is confirmed - reported fire is incipient

           iv     When fire situation is confirmed, all fire fighters ( Fire Fighters Organization chart)
                   shall proceed to  the control point  together with the Site Incident Controller ( SIC)
                   carrying  with them portable fire extinguisher, gas detector and one walkie talkie

           v      Meanwhile the standby fire fighting team shall prepare themselves for
                   possible reinforcement or backup duties by preparing new set of fire
                   extinguisher and standby at the fire command center awaiting for SIC
                   instructions.

           Vi    Upon activated by the SIC to proceed to the fire scene, the fire fighting
                   team stationed at the control point shall proceed to the fire scene
                   carrying with them the fire extinguishers.

           vii    Meanwhile the standby fire fighting team shall leave the command center
                   carrying a new set of fire extinguishers to the control point. These new
                   fire extinguishers shall be replaced with those used by the fire fighting
                   team.

            w    The process of moving to and fro from the fire command center to the
                    control point with new set of fire extinguisher and vice versa only stop
                    when the fire have been put out or when SCDF took over the incident
                    management and fire fighting

                   When fire situation is reported after office hours,
                   Fire case is confirmed - reported fire is incipient

                   Duty Fire fighting team  based on the weekly supervisor and company 
                   emergency response team duty roster  will fight the fire without risk to
                   their life and shall report to the Fire Command Center via Walkie Talkie
                   the following  information

                  a) what is on fire?
                  b) what material is being burnt
                  c) the extent of the fire
                  d) whether the fire location is near to any flammable chemicals
                      or risky installations

                  When fire situation is confirmed - reported fire is uncontrolled

                   If the reported fire is uncontrolled, the fire fighting team shall radioed back
                   to the Fire Command Center via their walkie talkie and report to the FCC
                   the following information before they evacuate the fire scene using the 
                   nearest fire emergency exit staircase to the Assembly Area.
           
                  a)  what is on fire?
                  b) what material is being burnt?
                  c) the extent of the fire
                  d)whether the fire location is near to any flammable chemicals or risky
                     installations

Fire Warden Roles & Responsibilities

Fire Warden Roles & Responsibilities
During A Fire Situation

 
   
  i  respective building fire wardens shall checked the sub fire alarm panel to establish the exact location of
     the fire alarm activation in his/her location immediately after being notified by the Fire Command Center
     that fire alarm has been activated at his/her floor.

 ii  Upon establish the exact location, the fire warden shall proceed to that location and immediately conduct
     physical check on his/her floor & surrounding to establish whether fire situation is confirm and report
     to the FCC via the building intercom system or via walkie talkie

iii  Instruct FW asst to switch off machinery or equipments in their purview

v prepare his building occupants for evacuation if fire not on his/her building/floor and notified the fire
    command center through floor intercom system.

v  report to fire command center if fire is on his/her building/floor through  floor intercom system and effect
   orderly evacuation immediately.
vi  Alert all occupants on his/her floor to evacuate by the nearest staircase.

vii Retrieve the building emergency headcount list from the reception & identify from the register any
    physically impaired or pregnant employees on his/her building/floor who require assistance during
    evacuation

viii Combed & checked all toilets, offices and pantry for occupants as some fearful occupants may hide in
     those areas.

 viiii Close all exit fire doors of all staircase landings
 w   Report “ALL CLEAR” to the FCC before he/she evacuate the building by the nearest exit to the
         Assembly Area                   

SCDF upcoming events

(adsbygoogle = window.adsbygoogle || []).push({});

Upcoming Events

HardwareZone Singapore

Jobs Portal