Safety Checklist For Machine Preventive Maintenance

SAFETY CHECKLIST FOR MACHINE PREVENTIVE MAINTENANCE
Safety Questionnaire			Yes	No
	Is sufficient clearance provided around and between machines to allow for safe operations, set up and servicing, material handling, and waste removal?
	Is equipment and machinery securely placed and anchored, when necessary to prevent tipping or other movement that could result in personal injury?
	Is there a power shut-off switch within reach of the operator’s position at each machine
	Are the nocurrent-carrying metal parts of electrically operated machines bonded and grounded?
	Are all moving chains and gears properly guarded?
	Are splash guards mounted on machines that use coolant to prevent the coolant from reaching employees?
	Are methods provided to protect the operator and other employees in the machine area from hazards created at the point-of-operation, ingoing nip points, rotating parts, flying chips, and sparks?
	Are machinery guards secure and so arranged that they do not offer a hazard in their use?
	Are all pulleys and belts that are within 7 feet of the floor or working level properly guarded?
	Do arbors and mandrels have firm and secure bearings and are they free from play?
	Are machines constructed so as to be free from excessive vibration when the largest size tool is mounted and run at full speed?
	Are fan blades protected with a guard having openings no larger than 1/2 inch., when operating within 7 feet of the floor?
	Are saws used for ripping, equipped with anti-kick back devices and spreaders?
	Are radial arm saws so arranged that the cutting head will gently return to the back of the table when released
	Is all machinery firmly attached to the floor, table, or an adequate base to prevent tipping over?
	Are all guards in place and are they jury rigged to prevent them from performing their intended purpose?
	Is machinery and equipment kept clean and properly maintained?
	Is clothing, jewelry, and hair worn by the employee appropriate for machine hazards?
	Are manually operated valves and switches controlling the operation of equipment and chines clearly identified and readily accessible
	Are all emergency stop buttons colored red?
	Can electric power or other energy sources to each machine be locked for maintenance, repair, or security?
	Are foot-operated switches guarded or arranged to prevent accidental actuation by personnel or falling objects?
	Are revolving drums, barrels, points-of-contact, and containers required to be guarded by an enclosure that is interlocked with the drive mechanism, so that revolution cannot occur unless the guard enclosure is in place?
	Are provisions made to prevent machines from automatically starting, or recycling, when power is restored after a power failure or shutdown?

Safety Checklist For Abrasive Blasting 

SAFETY CHECKLIST FOR ABRASIVE BLASTING MACHINE
Safety Questionnaire		Benchmark using WSH (Abrasive Blasting) Regulations	Yes	No
1.0 Personal Protective Equipment
2.1	Do you know what are the required PPE for abrasive blasting activity
2.2	Is suitable warning hazards sign displayed at suitable location near the abrasive blasting equipments?
2.0 Working In Hazardous Environment
2.2	Are you aware of the hazards associated with abrasive blasting
2.3	Is there a risk assessment conducted on abrasive blasting and can you access them
2.4	Do you know what are the control measures implemented in abrasive blasting risk assessment to protect the workers health
3.0	Is the abrasive blasting equipment checked?
3.1	Do you conduct pre start check on the abrasive blasting machine prior to using them
3.2	Can you re-use the blasting media after they have been used for many times?
3.3	Is the abrasive blasting room of adequate lighting
3.4	Is the abrasive blasting room have a dusty ambient
3.5	Are measures implemented to discharge the static charges from the blasting nozzle
4.1	Is the blasting machine air ventilation of velocity not less than 150 linear meter per minute?
4.2	Is there a cleaning maintenance regime for the abrasive blasting machine
4.3	Is the abrasive blasting machine inspected once in every week? Is there a maintenance and inspection regime record